News & Events Home   /    News    /    The tire mobile cone crusher manual pdf

The tire mobile cone crusher manual pdf
What can help you, fill out the form below and submit, we will get back to you as soon as possible. Send a message
The working principle of the tire mobile cone crusher is that the motor drives the eccentric sleeve to rotate through the transmission device. The moving cone rotates under the eccentric bushing. The section of the moving cone close to the static cone becomes the crushing cavity, and the material is subjected to the moving cone and static. The cone is broken by multiple extrusions and impacts.

Tire mobile cone crusher performance advantages:

1. Flexible maneuverability, it is easier to drive in the rugged road environment of the broken field:
Save time for quick entry to the site. It is more conducive to stationing in a reasonable construction area, eliminating the fixed and cumbersome steel frame structure and foundation construction, saving a lot of time.

2. Reduce material cost:
The site can be directly selected, opened to the site, without the need to transport, directly reach the finished product size; in addition, the extended unit can directly send the broken materials into a specific transfer belt conveyor, eliminating transportation costs.
The customer can provide more flexible process plan configuration for the material type and product requirements in the process, and meet various requirements such as user mobile crushing and mobile screening, so that the organization and logistics transfer are more direct and effective, and the cost is maximized. .
tire mobile cone crusehr manual pdf
How to install and debug the tire mobile cone crusher?

The tire mobile cone crusher is installed with the frame first mounted on a horizontal basis and calibrated for levelness, followed by the drive shaft. Install the eccentric bushing from the top of the rack into the rack sleeve and align the gaps in the bevel gear. The spherical bearing support and the lubrication system and the water seal system are then installed and the assembled spindle and movable cone are inserted, followed by the support ring, the adjustment ring and the spring, and finally the dosing device.
After loading, carry out a 7-8 hour no-load test. If there is no problem, carry out the 12-16 hour load test. At this time, the oil discharged from the drain pipe should not exceed 50-60 °C. Before starting the mobile cone crusher, first check whether there is any ore or other objects stuck in the crushing chamber; check whether the width of the discharge port is appropriate; check whether the spring safety device is normal; check the oil quantity and oil temperature in the fuel tank (winter is not Below 20 ° C); and water supply to the water seal dust-proof device, then check the drainage, and so on. After making the above inspection and convinced that the inspection is correct, the mobile cone crusher can be started according to the following procedure. Start the oil pump to check the oil pressure. The oil pressure should be 0.8-1.5 (kg) cm2. Pay attention to the oil pressure and do not over-stress the oil to avoid accidents.

If you want to learn more about the The tire mobile cone crusher manual pdf you can leave a message to us or,we will reply to you within 24 hours.Thank you.

Send Enquiry

Please enter your requirement and contact information and we'll get back to you as soon as possible.

Your email
Your phone/whatsapp *